Clean Your Sewing Machine

Do you ever wonder how and when to clean your sewing machine?  If the answer is a big fat NO than now is the time!  The amount of dust and fibers that accumulate under that little cover is crazy!! Let’s walk through the steps. I promise, it’s really easy!

Learn how to clean your sewing machine.  The Sewing Loft

How To Clean Your Sewing Machine

 

This tutorial will be a guideline since there are so many different make and model machines on the market today.

Tools:

  • Manual
  • Long Tweezers
  • Small Brush
  • Disc Shape Screwdriver

*All of these items should come with your machine.

Here is how I clean my sewing machine:

Start by gathering your tools and turing off your machine.  You could even unplug it for extra safety measure.  I start by making sure the needle is in the “UP” position and turn off the machine.  Remove the needle and the presser foot holder.  Slide your flat bed attachment (surface) off.  Slide the needle plate cover towards you to remove.  See all that gunk? YUCK!

Simple steps to clean your sewing machine and remove dust build up. The Sewing Loft

Now it’s time to start cleaning.  Grab that small brush and those tweezers and start cleaning away.

How to clean your sewing machine with simple tools.  The Sewing Loft

If you haven’t cleaned your machine in awhile you might be shocked.  Those lint balls are gross!

Clean your sewing machine of dust and lint.  The Sewing Loft

Some are buried deep and need to be pulled out with the longer tweezers. Remember the game Operation?  Use the small brush and tweezers to clean out all that gunk.

How to clean your sewing machine.  The Sewing Loft

My machine has a removable bobbin basket.  I like to take this out and clean both it and the area around it off.  Before you carefully remove the bobbin case, take a mental snapshot.  (Pull out your camera if you need to. Trust me, if you’ve never done this before you will thank me later.)

Take a mental snapshot of the bobbin basket placement. The Sewing Loft

Quick Tip- My manual suggests running a vacuum brush over it but I’ve never tried.  Do not use compressed air here.  You do not want to push the link into the machine.

Want to go a few steps further?  Grab that disc shape screwdriver and unscrew the needle plate.  I was shocked at all these dust bunnies the 1st time I did this.  Repeat the cleaning process.  While your there, if your machine has a cutter feature be sure to give the knife a quick sweep of the brush.  This will help keep things running smooth. 

Tips on how to clean your sewing machine.  The Sewing Loft

Tips on how to clean your sewing machine.  The Sewing Loft

Now it’s time to refer to your mental snapshot and put everything back together.  The tricky part on my machine is the bobbin basket.  There is a small green dot that needs to be lined up at the center.  Refer to your sewing manual for tips on your machine.

Before you carefully remove the bobbin case, take a mental snapshot.  (Pull out your camera if you need to. Trust me, if you've never done this before you will thank me later.)

To keep your machine in top working order, let’s start fresh and grab a new needle.  Once everything is back together, let’s get her looking good by taking it one step further and wipe down the surface.  I like to do it with a soft cloth dipped in a neutral detergent.  Be sure to squeeze it out firmly before wiping down the exterior surface.  Then give it another pass with a fresh dry cloth.  Your baby should be looking good as new!

Clean your machine and start fresh by replacing your needle.  The Sewing Loft

The whole process should only take 4 to 5 minutes total.  It is best to clean out your sewing machine after every big project to keep everything in working order.

**I don’t recommend oiling your machine. I believe that this step is best left to the professionals.  Actually, I recommend getting your friend a yearly check up.  That’s right, sometimes they need a little preventive medicine to keep things in working order.

Additional ways to keep your sewing machine clean:

  • Keep your girl covered! That’s right, most machines come with a simple dust cover.  Use it! Dust from lint gets everywhere in your sewing space.
  • Changes your needles often. It is recommended that we replace them after 4-6 hours of sewing.  (I get a big FAIL in this department!)
  • Watch the tension when winding your bobbins.
  • Do not use old or vintage thread.  Technology has changed and advanced so much over the years.  Vintage threads tend to produce more loose fibers and lint will accumulate faster. Save the vintage spools for a pretty display.
  • Be sure to have your machine serviced.  They will grease her up when needed, check tension settings and all machine parts.

Keep your machine in working order with these simple steps. The Sewing Loft

That’s it!  Now that you have learned how to clean your sewing machine, why not check under the hood of your serger.

The Sewing Loft

 

 

 

 

Hello! Are you new to The Sewing Loft?

If so, I’m glad you stopped by and hope that something has inspired you to keep your needle moving!  Don’t miss a single project and subscribe via email HERE! Bonus- free embroidery pattern with newsletter sign up.  Another great way to connect with me is via FacebookPinterestTwitterGoogle+ or Follow my blog with Bloglovin.  I’m looking forward to getting to know you and creating together!

Craftsy

Comments

  1. So helpful!! I thought I was pretty on top of keeping my machine clean . . . eeek!! Not at all!! Pinning this!

  2. Recently I had to have my machine serviced.( I was complaining). My son said “Do you have your car serviced on a regular basis. Of course. Well, with the amount of sewing you do you need to take care of your machine as you would your car” The simplest logic is sometimes the best.

    • So true MariJanyne! I think we all take it for granted but I’m determined to be better about my routine maintenance. Especially since it is SO easy!!
      Give my best to the Clippers! Miss you guys.
      ~Heather

  3. Chrysanthemum says:

    Thanks for this, I do clean my machine and it does help… I just started changing my needle more often and now am trying to keep track of it,
    Now how do you adjust the tension when it goes wrong?..when I’m free motion quilting with my machine, the bottom thread is sometimes a little loose especially when I go around corners.

  4. My sewing machine needs a good cleaning! Your post serves as a good reminder to me to get that done!! I’ve linked to your tutorial on Craft Gossip:
    http://sewing.craftgossip.com/tutorial-how-to-clean-your-sewing-machine/2014/02/21/
    –Anne

  5. I literally just did this yesterday on my Babylock.

  6. I cleaned my machine on Monday.

  7. Great advice!
    I have another tip for those who may not have a good “mental picture”. Just use your phone and take a quick snapshot of the assembly to assist with the memory of how it all goes back together. So simple and effective.

  8. This was quite thorough—thank you. I have used compressed air thinking it saves time, so thank you for the warning, I will go back to the brush next time. Read my post on keeping track of your needles:

    http://www.thelostapron.com/2012/08/keep-track-of-your-needles.html

  9. Derinda Zubek says:

    I keep a skinny “SOFT” paint brush right next to my machine and I run it around the bobbin case with every bobbin change, project change or more often if sewing on fleece or equally fuzzy fabrics. Each time a fair amount of “fuzz” comes out on the brush! Sewing machines are expensive to repair and a little easy maintenance is soooo productive! Good Blog!

  10. Allyson LePenske says:

    Thank you for the great info. I always wondered what that little round thing was for in my tool kit! Lol!

  11. This is great! When I clean my machine, I use a long skinny paint brush. It really gets to those hard to reach areas and the dust bunnies stick to the brush.

  12. Catherine Silling says:

    good tutorial for cleaning machines. I only disagree with one item mentioned. Some machines need regular oiling. Read your manual regarding the oiling. Ask your service man or woman who cleans machines professionally if you have any doubt. Generally there are just a couple spots to oil. In the extremely dry climate of NewMexico, I have to oil my machine regularly or it would die of thirst. I can tell by a change in tone it makes if I have waited too long to oil. Caroline of SewCanShe.com (see her blog)mentions in last weeks blog that her new Juki has 5 spots to oil and must be done DAILY if you sew daily. So, read your manual!!!! Thanks for the info.

    • Hello Catherine,
      Thank you. I agree that machines need regular oiling, maintenance and service however, this differs on each individual machine. That is why I believe it is best to read the manual and talk to your professionals. Over oiling can be just as dangerous as no oil. Yearly check ups and service are best. Think of it as your physical.
      ~Heather

      ps- love Caroline!

  13. Glennis Griner says:

    I like the idea of photographing the bobbin! A q-tip is handy for getting lint out of crevices.

  14. I want to go clean my girl right away!

  15. a very helpful tutorial thanks for all the great tips…Kim

  16. I actually just did this last night. The tweezers would have helped. I wanted to oil my machine but can’t get it apart enough. Hope what I managed to do helps.

  17. OhEmmGee…my poor machine says thank you for saving her life. If there was a place to donate fuzz balls & dust bunnies, the building would be dedicated to her, Sewsie Threadsly. Thank you!

    • Love it Tami! I think we all feel that way and forget to clean them out. I feel like my girl has a bit more “spring” in her stitch since I dolled her up.
      Glad to hear you have captured all the dust bunnies and relocated them.
      ~Heather

  18. Patricia Charron says:

    desperately need to print out this tutorial, looks exactly like my Baby Lock Decorators Choice, if I had this to look at maybe it would not have cost me $129 to have tect try to straighten out what I did wrong trying to clean it with no manual.

  19. Peggy Ruble says:

    When I was young and didn’t know better, I actually got rid of a couple of sewing machines because the stitches wouldn’t lock. I finally found out that all I needed was for the fuzz and lint to be removed! Now I clean after each large project and sometimes during. Thanks. Peggy

  20. Kathleen Brown says:

    I do this periodically. I also regularly use a vacuum attachment that I purchased (for less than $20) that is for cleaning computer keyboards. It has tiny, skinny hoses. Then I hold a flexible straw in the tiny hose and really clean out those hard to reach crevices. Works great!

Leave a Reply